TSX L4-2.4L (2005)
Sunroof / Moonroof Switch: Testing and Inspection
Switch Test
NOTE: The moonroof can still be operated for about 10 minutes after the ignition switch is turned from the "II" to the "I" or "O" positions, as long as
none of the doors are opened.
1. Carefully pry out the switch panel (A), then disconnect the 6P connector (B) from the switch.
2. Carefully push out the moonroof switch (C) from behind the switch panel.
3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, replace the bulb (D) or the switch.
