TSX L4-2.4L (2005)
4. '06-07 models: From under the seat cushion, disconnect the recline motor connector (A), and the seat-back heater connector (B) on the 8-way
power seat. Detach the side airbag connector clip (C), ODS unit connector clip (D) and harness clip (E) on the 4-way power seat. Release the seat
cushion cover (F) from the seat cushion frame spring (G), then pull the cover back, and remove the clamps (H).
5. Remove these items from the front seat, then remove the seat cushion, manual seat , 4-way power seat, 8-way power seat:
-
Recline cover
-
Center cover
-
Front cover
6. 8-way power seat: Remove the clip (A), then remove the lumbar support handle (B).
