TSX L4-2.4L (2005)
8. Pull out the seat-back pad (A) from the frame (B), then pull out the headrest guides (C) while pinching the end of the guides, and remove them.
9. Remove the seat-back cover and pad from the seat-back frame.
10. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), then remove the seat-back cover.
11. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles, make sure the material is stretched evenly over the pad before securing the clips.
-
Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.