TSX L4-2.4L (2005)
Splash Guard: Service and Repair
Splash Shield Replacement
Splash Shield Replacement
NOTE: Take care not to scratch the body.
1. Remove the splash shield (A).
1. From both wheel arch, remove the bolts (B), clips (C), and clip (D) securing the front inner fender (E) and splash shield (on the body).
2. From under the front bumper (F), remove the clips (C), and bolts (G).
3. Release the hooks (H) of the splash shield, then pull the splash shield out.
2. Install the splash shield in the reverse order of removal, and note these items:
-
Check for damaged or stress-whitened clips, and replace them with new ones.
-
Push the clips into place securely.
