TSX L4-2.4L (2005)
9. Remove the camshaft holders. Measure the widest portion of plastigage on each journal.
^
If the camshaft-to-holder clearance is within limits, go to step 11.
^
If the camshaft-to-holder clearance is beyond the service limit and the camshaft has been replaced, replace the cylinder head.
^
If the camshaft-to-holder clearance is beyond the service limit and the camshaft has not been replaced, go to step 10.
10. Check the total runout with the camshaft supported on V-blocks.
^
If the total runout of the camshaft is within the service limit, replace the cylinder head.
^
If the total runout is beyond the service limit, replace the camshaft and recheck the camshaft-to-holder oil clearance. If the oil clearance is still
beyond the service limit, replace the cylinder head.