TSX L4-2.4L (2005)
7. Tighten the bolts in two or three steps. In the final step tighten all bolts, in sequence, to 12 Nm (1.2 kgf-m, 8.7 ft. lbs.).
NOTE:
^
Wait at least 30 minutes before filling the engine with oil.
^
Do not run the engine within 3 hours after installing the head cover.
8. Install the dipstick (A) and breather hose (B).
9. Tighten the bolt (C) securing the power steering hose bracket.
10. Tighten the two bolts (D) securing the vacuum line.
11. Install the four ignition coils.
12. Check that all tubes, hoses, and connectors are installed correctly.
13. Install the intake manifold cover.
