TSX L4-2.4L (2005)
Crankshaft Main Bearing Seal: Service and Repair
Transmission End Crankshaft Oil Seal Installation - In Car
Special Tools Required
^
Driver 07749-0010000
^
Oil seal driver attachment 9607ZAD-PNAA100
1. Remove the transmission:
^
Manual transmission
^
Automatic transmission
2. M/T model: Remove the pressure plate, clutch disc, and flywheel.
3. A/T model: Remove the drive plate.
4. Clean and dry the crankshaft oil seal housing.
5. Use the special tools to drive a new oil seal squarely into the block to the specified installed height.
6. Measure the distance between the engine block (A) and oil seal (B).
7. M/T model: Install the flywheel, clutch disc, and pressure plate.
8. A/T model: Install the drive plate.
9. Install the transmission:
^
Manual transmission
^
Automatic transmission
