acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Condenser Fan > < Condenser HVAC|Service and Repair|Page 7183
Page 3
background image

-

If you're installing a new A/C condenser, add refrigerant oil (KEIHIN SP-10).

-

Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the correct
O-rings for HFC-134a (R-134a) to avoid leakage.

-

Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.

-

Do not spill the refrigerant oil on the vehicle; it may damage the paint; if the refrigerant oil contacts the paint, wash it off immediately.

-

Be careful not to damage the radiator or the A/C condenser fins when installing the A/C condenser.

-

Charge the system.

-

Do the ECM/PCM idle learn procedure.

-

Do the power window control unit reset procedure.

-

Enter the anti-theft codes for the radio and the navigation system, then enter the customer's radio station and XM radio channel presets.

Condenser Fan > < Condenser HVAC|Service and Repair|Page 7183