TSX L4-2.4L (2005)
Alignment: All Technical Service Bulletins
Alignment - Right Rear Wheel Camber Out of Spec.
06-007
March 8, 2006
Applies To:
2004 TSX - ALL
2005 TSX - From VIN JH4CL9...5C000001 Thru JH4CL9...5C015076
Right Rear Wheel Camber Out of Specification
SYMPTOM
The right rear wheel camber is out of specification.
CORRECTIVE ACTION
Replace the right rear suspension upper arm, and do a four-wheel alignment.
PARTS INFORMATION
Arm, Right Rear Upper: P/N 52390-SEC-305
TOOL INFORMATION
Ball Joint Remover, 28 mm: T/N 07MAC-SL00200
WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Failed Part:
P/N 52390-SEA-013
Defect Code:
00401
Symptom Code:
00101
Skill Level:
Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
DIAGNOSIS
Check the right rear wheel camber:
^
If the right rear wheel camber is greater than -1° 30' but less than -2° 15', replace the right rear upper arm. See REPAIR PROCEDURE.
^
If the camber is greater than -2° 15', check for bent or damaged chassis and suspension components and repair as necessary.
REPAIR PROCEDURE
Replace the right rear upper arm.
^
Refer to page 18-32 of the 2004-05 TSX Service Manual, or
^
Online, enter keyword UPPER ARM, and select Rear Upper Arm Removal/Installation from the list.
