TSX L4-2.4L (2005)
48. Measure voltage between ECM/PCM connector terminal E7 and body ground.
Is there battery voltage?
YES - Go to step 53.
NO - Go to step 49.
49. Turn the ignition switch OFF.
50. Remove left the kick panel, then remove PGM-FI main relay 1 (FI MAIN) (A) from the under-dash fuse/relay box.
51. Measure voltage between PGM-FI main relay 1 (FI MAIN) 4P connector terminal No. 3 and body ground.
Is there battery voltage?
YES - Go to step 52.
NO - Repair open in the wire between the No. 8 FI ECU (ECM/PCM) (15 A ) fuse and PGM - FI main relay 1.
