TSX L4-2.4L (2005)
NO - Repair open in the wire between the No. 8 FI ECU (ECM/PCM) (15 A) fuse and PGM-FI main relay 1 (FI MAIN).
60. Turn the ignition switch OFF.
61. Check for continuity between PGM-FI main relay 1 (FI MAIN) 4P connector terminal No. 1 and ECM/ PCM connector terminals A2 and A3
individually.
Is there continuity?
YES - Replace PGM-FI main relay 1 (FI MAIN).
NO - Repair open in the wire between PGM-FI main relay 1 (FI MAIN) and the ECM/PCM (A2, A3).
62. Measure voltage between body ground and ECM/PCM connector terminals A4, A5, A8, and A9 individually.
Is there more than 0.2 V?
YES - Repair open in the wire(s) that had more than 0.2 V between G101 and the ECM/PCM (A4, A5, A8, A9).
NO - Go to step 63.
63. Measure voltage between body ground and ECM/PCM connector terminal A21.
Is there about 5 V?
YES - Go to step 71.
NO - Go to step 64.