TSX L4-2.4L (2005)
shares that wiring. To quickly check shared wiring check the operation of a component it serves. If that component works you know the shared wiring is
OK.
Connectors
All in-line and junction connectors are numbered (C725, C416 etc.). Component connectors are not numbered but are identified either by the name of the
component if the component only has one connector or by a capital letter (A, B, C etc.) if the component has more than one connector.
Below most connector numbers and component names are PHOTO and VIEW numbers. The PHOTO number refers to a photo in the back of the book
that shows the connector's location on the car. The VIEW number refers to an illustration in the back of the book that shows the connector terminals wire
colors connector cavity numbers and other details.
The connector cavity numbering sequence begins at the top left corner of the connector as seen from either of the viewpoints shown on diagram [8].
Except for the DLC (data link connector) disregard any numbers molded into the connector housing.
Wires
Wires are identified by the abbreviated names of their colors; the second color is the color of the stripe. Wires are also identified by their location in a
connector. The number "2" next to the male and female wire terminals at C554 for example means those terminals join in cavity 2 of connector C554.
