TSX L4-2.4L (2005)
fuse.
NO - Go to step 42.
42. Reinstall PGM-FI main relay 2 (FUEL PUMP) (A).
43. Check for continuity between fuel pump 5P connector terminal No. 5 and body ground.
Is there continuity?
YES - Replace PGM-FI main relay 2 (FUEL PUMP). Also replace the No. 19 FUEL PUMP (15 A) fuse.
NO - Check the fuel pump, and replace it if necessary. Also replace the No. 19 FUEL PUMP (15 A) fuse.
44. Jump the SCS line with the HDS.
45. Disconnect ECM/PCM connector E (31P).
46. Turn the ignition switch ON (II).
47. Measure voltage between ECM/PCM connector terminal E9 and body ground.
Is there battery voltage?
YES - Go to step 48.
NO - Repair open in the wire between the No. 19 FUEL PUMP (15 A) fuse and the ECM/PCM (E9).
