TSX L4-2.4L (2005)
A disconnected quick-connect fitting can be reconnected, but the retainer on the mating line cannot be reused once it has been removed from the line.
Replace the retainer when
-
replacing the fuel rail.
-
replacing the fuel line.
-
replacing the fuel pump.
-
replacing the fuel filter.
-
replacing the fuel gauge sending unit.
-
it has been removed from the line.
-
it is damaged.
NOTE: When replacing a retainer, use the same size and manufacturer.
Fuel Line/Quick-Connect Fitting Removal
1. Relieve the fuel pressure.
2. Check the fuel quick-connect fittings (A) for dirt, and clean them if needed.
