TSX L4-2.4L (2005)
12. Check for continuity between the (+) brush (A) and (-) brush (B). If there is continuity, replace the brush holder assembly.
Planetary Gear Inspection
13. Check the planetary gears (A) and ring gear (B). Replace them if they are worn or damaged.
Overrunning Clutch Inspection
14. While holding the drive gear (A), turn the gear shaft (B) clockwise. Check that the drive gear comes out to the other end. If the drive gear does not
move smoothly, replace the gear cover assembly.
15. While holding the drive gear, turn the gear shaft counterclockwise. The gear shaft should rotate freely. If the gear shaft does not rotate smoothly,
replace the gear cover assembly.
16. If the starter drive gear is worn or damaged, replace the overrunning clutch assembly; the gear is not available separately.
Check the condition of the torque converter ring gear to see if the teeth are damaged.
Starter Reassembly