TSX L4-2.4L (2005)
^
Set the steering gearbox in a press so that the gearbox housing side points upward.
^
Press the end seal and rack out of the gearbox.
NOTE:
^
Hold the steering rack to keep it from falling once it's pressed clear.
^
Be careful not to damage the inside of the cylinder when pressing out the cylinder end seals.
53. Remove the inner cylinder end seal from the steering rack:
^
Install the cylinder end seal remover on a 24-inch-long 3/8 inch drive extension, and insert it into the steering gearbox.
^
Press the inner cylinder end seal out of the gearbox.