TSX L4-2.4L (2005)
^
Set the clock (on vehicles without navigation).
^
Make sure the horn, the turn signal switches, and the steering wheel switches work properly.
114. Fill the power steering system with fluid, then bleed the air from the system.
115. After the power steering system is filled and bled, do these checks:
^
Start the engine, and let it to idle. Turn the steering wheel from lock-to-lock several times to warm up the fluid.
^
Check the steering wheel spoke angle. If the steering spoke angles to the left and the right are not equal (the steering wheel and the rack are not
centered), correct the engagement of the joint/pinion shaft splines.
^
Set the steering column to the middle tilt and telescopic positions, then do the front toe inspection/adjustment.
