TSX L4-2.4L (2005)
NOTE:
^
Keep the tool straight to avoid damaging the cylinder wall.
^
Use a press to remove the seal. Do not use a hammer, as you could break the seal and pieces could remain in the gearbox.
54. Replace the steering rack piston seal ring:
^
Pry the piston seal ring and 0-ring off the steering rack piston. Make sure you do not damage the ring groove or edges when removing the seal
ring.
^
Coat the new 0-ring and the new piston seal ring with power steering fluid when you place them on the piston seal ring guide to help them slide
easier.