TSX L4-2.4L (2005)
4. Compress the damper assembly by hand, and check for smooth operation through a full stroke, both compression and extension. The damper
should extend smoothly and constantly when compression is released. If it does not, the gas is leaking and the damper should be replaced.
5. Check for oil leaks, abnormal noises, and binding during these tests.
Reassembly
NOTE: Refer to the Exploded View as needed.
1. Assemble the damper disassembled parts except for the washer and self-locking nut.
2. Install the damper assembly on the commercially available strut spring compressor (A), and compress the spring lightly.
3. Align the bottom of the spring and the stepped part (B) of the lower spring seat.
4. Position the damper mounting base (A) so the stud bolt (B) in it is aligned with the aligning tab (C) in the damper unit.
5. Compress the damper spring. Do not compress the spring excessively.
