TSX L4-2.4L (2005)
3. Remove the damper fork (A) from the damper (B) and lower arm (C).
4. Remove the two 8 mm flange nuts (A) and three 10 mm flange nuts (B) from the top of the damper, and remove the damper assembly (C).
Disassembly/Inspection
1. Compress the damper spring with the commercially-available strut spring compressor (A) according to the manufacturer's instructions then remove
the self-locking nut (B) while holding the damper shaft (C) with a hex wrench (D). Do not compress the spring more than necessary to remove the
nut.
2. Release the pressure from the strut spring compressor, then disassemble the damper as shown in the Exploded View.
3. Reassemble all the parts, except for the spring mounting cushion and spring.
