TSX L4-2.4L (2005)
8. Install the new front knuckle ring (A) on the inside of the knuckle by aligning the cutout portion (B) on the ring with the wheel sensor hole (C) in
the knuckle. Be careful not to damage or deform the ring when installing it.
9. Install the snare ring (A) securely in the knuckle (B).
10. Install the splash guard (C), and tighten the screws (D) to the specified torque.
11. Press a wheel bearing (A) onto the hub (B) using the special tools and a press.
