TSX L4-2.4L (2005)
Pressure Regulating Solenoid: Service and Repair
Clutch Pressure Control Solenoid Valve B and C Replacement
A/T Clutch Pressure Control Solenoid Valve B and C Replacement
1. Disconnect the A/T clutch pressure control solenoid valves B and C connectors.
2. Remove the A/T clutch pressure control solenoid valves B and C.
3. Remove the ATF joint pipes (A), O-rings (D), and gasket (E).
4. Clean the mounting surface and fluid passages of the transmission housing.
5. Install the new gasket on the transmission housing and install the ATF joint pipes.
6. Install new O-rings over the ATF joint pipes.
7. Install new A/T clutch pressure control solenoid valves B and C.
8. Check A/T clutch pressure control solenoid valves B and C connectors for rust, dirt, or oil, and clean if necessary, then connect the connectors
securely.
