TSX L4-2.4L (2005)
Fluid - A/T: Service and Repair
ATF Replacement
ATF Replacement
NOTE: Keep all foreign particles out of the transmission.
1. Bring the transmission up to normal operating temperature (the radiator fan comes on).
2. Park the vehicle on level ground, and turn the engine off.
3. Remove the drain plug (A), and drain the automatic transmission fluid (ATF). Then reinstall the drain plug with a new sealing washer (B).
NOTE: If a cooler cleaner is to be used, refer to ATF cooler cleaning.
4. Remove the dipstick, and refill transmission with the recommended fluid amount through the opening (A) of the dipstick guide pipe until the level
reaches the upper mark on the dipstick. Always use Honda ATF-Z1 automatic transmission fluid (ATF). Using a non-Honda ATF can affect shift
quality.