TSX L4-2.4L (2005)
10. Remove the ATF dipstick, and remove the bolts securing the ATF cooler inlet line brackets (A) and ATF dipstick guide pipe (B) from the
transmission hanger (C).
11. Remove the harness clamp (D), then remove the ATF dipstick guide pipe.
12. Remove the shift solenoid valve cover (A), dowel pins (B), and gasket (C).
13. Disconnect the shift solenoid valve connectors remove the solenoid mounting bolts (H), then hold the solenoid valve body and remove the shift
solenoid valves. Do not hold the connector to remove the shift solenoid valve.
14. Install the new O-rings (two O-rings per solenoid valve) (F) on the replacement solenoid valve.
15. Install the shift solenoid valves C, D, and E. While holding the shift solenoid valve body, be sure to install the solenoid valves until their mounting
brackets contact the servo body.
16. Install the shift solenoid valves A and B. While holding the shift solenoid valve body, be sure to install the solenoid valves until their mounting
