TSX L4-2.4L (2005)
Pressure Plate: Specifications
Pressure plate
Warpage
Standard or New ....................................................................................................................................................... 0.08 mm (0.003 inch) maximum
Service Limit ............................................................................................................................................................................. 0.15 mm (0.006 inch)
Height of diaphragm spring fingers measured with special tool and feeler gauge
Standard or New ........................................................................................................................................................... 0.6 mm (0.02 inch) maximum
Service Limit ................................................................................................................................................................................. 0.8 mm (0.03 inch)
Torque the mounting bolts in a crisscross pattern. Tighten the bolts in several steps to prevent warping the diaphragm spring.
PRESSURE PLATE MOUNTING BOLT TORQUE, 25 Nm (2.6 kgf-m, 19 ft. lbs.)