TSX L4-2.4L (2005)
8. Wrap the splines on the driveshaft with vinyl tape (A) to prevent damage to the boot.
9. Remove the inboard boot. Be careful not to damage the boot.
10. Remove the vinyl tape.
Outboard Joint Side:
1. Remove the boot bands. Be careful not to damage the boot and dynamic damper. If the boot band is an ear clamp type (A), lift up the three tabs
(B) with a screwdriver.
2. Slide the outboard boot (A) partially to the inboard joint side. Be careful not to damage the boot.
3. Wipe off the grease to expose the driveshaft and the outboard joint inner race.
