TSX L4-2.4L (2005)
Gear Lockout Solenoid: Service and Repair
Reverse Lockout Solenoid Disassembly/Reassembly
1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the customer's radio station and XM radio
channel presets. Disconnect the negative (-) cable from the battery first, then disconnect the positive (+) cable. Remove the battery.
2. Remove the air cleaner housing.
3. Remove the battery base.
4. Carefully remove the shift cable, select cable, and cable bracket together to avoid bending the cables.
5. Disconnect the countershaft speed sensor connector, back-up light switch connector, and reverse lockout solenoid connector.
6. Remove the bolts (A) and reverse lockout solenoid (B).
7. Remove the roller (A), the select lock return spring (C), and the select lock cam B.
8. Install in the reverse order of removal.
9. Remove any dirt and oil from the sealing surface. Apply liquid gasket (P/N 08718-0002) to the sealing surface.
NOTE: If 4 minutes have passed after applying liquid gasket, reapply it, and assemble the housings. Allow it to cure at least 20 minutes after
assembly before filling the transmission with oil.
10. Install the reverse lockout solenoid.
11. Connect the reverse lockout solenoid connector, back-up light switch connector, and countershaft speed sensor connector.
12. Install the cable bracket, select cable, and shift cable.
