TSX L4-2.4L (2005)
18. With a sponge, carefully apply a light coat of body primer to any exposed paint or metal around the flange where new adhesive will be applied. Let
the primer dry for at least 10 minutes:
-
Do NOT apply body primer to any remaining original adhesive on the flange.
-
Be careful not to mix up the body and glass primer sponges.
-
Never touch the primed surfaces with your hands.
-
Use a body line (A) in the upside and both sides of the rear window opening flange as a guide to keep within width of the body primer shown
while applying.
19. Cut a "V" in the end of the nozzle (A) on the adhesive cartridge as shown.