ZDX V6-3.7L (2010)
Grille: Service and Repair
Front Grille Replacement
Front Grille Replacement
Grille Replacement
NOTE:
-
Take care not to scratch the front bumper.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove the front bumper See: Bumper/Front Bumper/Service and Repair.
2. Detach the clips and release the rib (A), then remove the front grille (B) from the front bumper (C).
NOTE: To release the clips, pry up on the center pin at the notch (D).
3. Install the grille in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
Molding Replacement
NOTE: Take care not to scratch the front grille.
1. Remove the front grille.
2. For some models: From behind the grille, remove the TORX screws, and release the projections (A), then remove the front grille radar cover (B)
from the front grille base (C).
