ZDX V6-3.7L (2010)
Keyless Entry Receiver: Service and Repair
Keyless Access RF Unit 2 Replacement
Keyless Access RF Unit 2 Replacement
1. Fold forward the rear seat-back See: Seats/Service and Repair/Rear Seat Removal/Installation.
2. Lift the front edge of the seat flap assembly See: Seats/Service and Repair/Rear Seat Removal/Installation.
3. Disconnect the 3P connector (A) from RF unit 2 (B).
4. Remove the two bolts, then remove RF unit 2.
5. Install the unit in the reverse order of removal.
