ZDX V6-3.7L (2010)
Power Mirror Motor: Service and Repair
Power Mirror Actuator Replacement
1. Remove the these items:
-
Mirror holder See: Service and Repair/Mirror Holder Replacement
-
Power mirror See: Service and Repair/Power Mirror Replacement
2. Disconnect the power mirror 16P connector.
3. Remove the gasket (A), then remove the two screws and connector from the mirror bracket (B).
4. Remove the cover (C).
5. Remove the three screws and the power mirror actuator (A), and disconnect the connectors (B).
6. Remove the five screws (A), and separate the visor (B) from the actuator housing (C).