ZDX V6-3.7L (2010)
-
Do not apply body primer to any remaining old adhesive on the flange.
-
Never touch the primed surfaces with your hands.
11. Cut a "V" in the end of the nozzle (A) on the adhesive cartridge as shown.
12. Put the cartridge in a caulking gun, and run a continuous bead of the adhesive (A) along the edge of the housing (B) as shown or along the old
adhesive path on the body. Apply the adhesive within 30 minutes after applying the body primer. Make a slightly thicker bead at each corner.