ZDX V6-3.7L (2010)
4. Clean the front fixed glass panel bonding surface with a shop towel dampened in isopropyl alcohol. After cleaning, do not allow oil, grease, and
water to contact on the clean surface.
5. Apply a light coat of glass primer to the attaching surface of the front fixed glass panel (A) with a nozzle. Let the glass primer dry for at least 10
minutes:
-
Do not apply body primer.
-
Attach the glass front gap seal within 30 minutes after applying the glass primer.
6. Fold the edge of the adhesive backing (A) at each side on a new glass front gap seal (B).
NOTE: The end of the front gap seal must contact the side seal.
