ZDX V6-3.7L (2010)
5. If the continuity is not as specified, replace the seat wire harness.
6. Check for continuity between seat heater connector B (2P) terminals No. 1 and No. 2. There should be continuity.
7. If the continuity is not as specified, replace the seat-back heater See: Service and Repair.
8. Check for continuity between seat heater connector A (3P) terminals No. 1 and No. 3, and terminals No. 2 and No. 3. There should be continuity.
9. If the continuity is not as specified, replace the seat cushion heater See: Service and Repair.
Front Passenger's Seat
NOTE: SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, precautions
and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs
or servicing.
1. Remove the front passenger's seat See: Service and Repair/Front Seat Removal/Installation.
2. Disconnect the 4P connector (A) from the seat heater.
3. Check for continuity between seat heater 4P connector terminals No. 1 and No. 3 and terminals No. 2 and No. 3. There should be continuity.
4. If the continuity is not as specified, replace the seat cushion heater See: Service and Repair.
Rear Seat
1. Remove the rear seat cushion See: Service and Repair/Rear Seat Removal/Installation.
2. Disconnect the 3P connectors (A) from the seat cushion heater.