ZDX V6-3.7L (2010)
Seat Heater: Testing and Inspection
Seat Heater Test (With Ventilated Seats)
Seat Heater Test
Driver's Seat
NOTE: SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, precautions
and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs
or servicing.
1. Remove the driver's seat See: Service and Repair/Front Seat Removal/Installation.
2. Remove the seat-back cover See: Seat Cover/Service and Repair/Front Seat-Back Cover Replacement.
3. Disconnect connector A (5P) and connector B (2P) from the seat heaters.
4. Check for continuity between seat heater connector A (5P) terminal No. 3, and terminal No.2. There should be continuity.
5. If the continuity is not as specified, replace the seat cushion heater See: Service and Repair.