ZDX V6-3.7L (2010)
Splash Guard: Service and Repair
Front Splash Shield Replacement
Front Splash Shield Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove the front splash shield (A).
1. Detach the clips (B) securing the front bumper (C) and the splash shield to the body.
2. Detach the clips (D) securing the front inner fender (E) and the splash shield to the body.
3. Detach the clips (F, G) securing the splash shield to the body.
4. Detach the clips (H) securing the engine undercover (I) and the splash shield.
2. Install the splash shield in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
