ZDX V6-3.7L (2010)
Splash Guard: Service and Repair
Rear Side Sill Strake Replacement
Rear Side Sill Strake Replacement
1. Remove the rear inner fender as needed See: Fender/Rear Fender/Rear Fender Liner/Service and Repair.
2. Remove the screws and the clips, then remove the rear side sill strake (A) from the rear side sill panel (B).
3. Install the strake in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.