ZDX V6-3.7L (2010)
Cowl Moulding / Trim: Service and Repair
Cowl Cover Replacement
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE:
-
Take care not to scratch the cowl cover or the body.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove these items:
-
Front fender trims, both sides
-
Windshield wiper arms See: Wiper and Washer Systems/Wiper Arm/Service and Repair
2. Detach the clips securing the cowl cover (A) with a trim tool.
3. If necessary, remove the hood rear seal (B) from the hooks (12 places) (C).
4. Remove the cowl cover (A).
1. Detach the clips (B, C).
2. Release the hooks (D) of the hood hinge covers (E) from the windshield side trim (F).
3. Pull the cover forward to release the hooks (G).