ZDX V6-3.7L (2010)
11. After installing, check the molding for kinks or bindings.
12. Reinstall all remaining removed parts.
Glass Front Gap Seal
NOTE: The illustrations show the case that the moving glass panel is removed.
1. Open the moving glass panel. If required, remove the moving glass panel See: Roof and Associated Components/Sunroof / Moonroof/Sunroof /
Moonroof Panel/Service and Repair.
2. Remove the glass front gap seal (A) from the rear edge of the front fixed glass panel (B). If necessary, cut off the gap seal with a utility knife.
3. Scrape off the remaining double-sided adhesive tape (A) with a putty knife from the front fixed glass panel (B).
NOTE: Do not scrape down to the painted surface of the body; damaged paint will interfere with proper bonding.