ZDX V6-3.7L (2010)
9. Press down on the entire glass front gap seal (A) against under the rear edge of the front fixed glass panel with a plastic spatula to attach the gap
seal with adhesive tape (B). Push the gap seal evenly from end to end and securely into place.
10. Reinstall all remaining removed parts.
11. Check the glass front gap seal for kinks or bindings after opening and closing the moving glass panel.
Glass Rear Gap Seal
NOTE: The illustrations show the case that the moving glass panel is removed.
1. Tilt the moving glass panel all the way up. If required, remove the moving glass panel See: Roof and Associated Components/Sunroof /
Moonroof/Sunroof / Moonroof Panel/Service and Repair.
2. Remove the glass rear gap seal (A) from the front edge of the rear fixed glass panel (B). If necessary, cut off the gap seal with a utility knife.