ZDX V6-3.7L (2010)
Parking Brake Cable: Adjustments
Parking Brake Inspection and Adjustment
Inspection
1. Press the parking brake pedal (A) with 294 N (30.0 kgf, 66.1 lbf) of force to fully apply the parking brake. The parking brake pedal should be
locked within the specified number of clicks.
2. Adjust the parking brake if the pedal clicks are not within the specification.
NOTE: Minor parking brake pedal adjustments (1 to 2 clicks) can be made with the adjusting nut (see parking brake minor adjustment). If a larger
adjustment is required, follow the major adjustment procedure using the adjuster nut at the parking brake drum (see parking brake major adjustment).
After installing new parking brake shoes and/or new brake disc/drum, make sure you drive the vehicle for "break-in" See: Parking Brake Shoe/Service
and Repair/Procedures.
Minor Adjustment
1. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
2. Release the parking brake pedal fully.
3. Press the parking brake pedal 1 click.
4. Tighten the parking brake adjusting nut (A) until the parking brakes drag slightly when the rear wheels are turned.