acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Distance Sensor, Cruise Control|Locations|Page 6225 > < Distance Sensor, Cruise Control|Locations|Page 6223
Page 2
background image

3. Turn the vertical adjusting bolt (C) on the driver's side with a screwdriver, and adjust the angle of millimeter wave radar so that the air bubble in

the level is centered.

Horizontal Aiming

1. Park the vehicle on level ground with at least this much open space around it: 32.8 ft (10 m) in front, 13.1 ft (4 m) in width, and 4.9 ft (1.5 m) in

height.

2. Make sure there are no reflecting objects or anything in this range.

3. Check the tire pressures, and adjust the pressures to the specified value if needed.

4. Put a person or an object equivalent to the driver's weight in the driver's seat.

Setting the Distance between the Target and the Vehicle

NOTE: When marking the floor, use suitable tape to mark the exact locations.

5. Adjust the tip of the height rod (A) on the target to the center of the front grille radar cover (B).

Distance Sensor, Cruise Control|Locations|Page 6225 > < Distance Sensor, Cruise Control|Locations|Page 6223