ZDX V6-3.7L (2010)
Cruise Control Switch: Testing and Inspection
Adaptive Cruise Control (ACC) Combination Switch Test
Adaptive Cruise Control (ACC) Combination Switch Test
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations and the precautions
and procedures See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair
before doing repairs or service.
1. Remove the ACC combination switch/distance switch See: Service and Repair/Adaptive Cruise Control (ACC) Combination Switch/Distance
Switch Removal/Installation.
2. On the switch side, check for continuity between the ACC combination switch/distance switch 12P connector terminal in each switch position
according to the table.
3. If the continuity is not as specified, replace the ACC combination switch/distance switch See: Service and Repair/Adaptive Cruise Control (ACC)
Combination Switch/Distance Switch Removal/Installation.
