ZDX V6-3.7L (2010)
40. Install the oil pan See: Engine Lubrication/Oil Pan/Service and Repair/Engine Oil Pan Installation.
41. Install the timing belt drive pulley to the crankshaft See: Crankshaft Gear/Sprocket/Service and Repair.
42. Install the cylinder heads See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head Installation.
43. Install drive plate See: Transmission and Drivetrain/Flex Plate/Service and Repair.
44. Install the transmission See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Installation.
45. Install the engine/transmission See: Service and Repair/Engine Installation.
NOTE: When any crankshaft main or connecting rod bearing is replaced, run the engine at idle until it reaches normal operating temperature, then
continue to run it for about 15 minutes.
