ZDX V6-3.7L (2010)
12. Install the engine hanger bracket (A).
13. Install the harness (B) to the upper cover.
14. Connect the breather hose (C) and install the harness clamp (D).
15. Reconnect the three injector connectors (E) and the two harness clamps (F).
16. Install the harness holder mounting bolts (G) and the engine ground cable (H).
17. Install the power steering (P/S) pump and the P/S hose bracket See: Service and Repair/Removal and Replacement/Cylinder Head Installation.
18. Install the drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair.
19. Install the three ignition coils to the rear cylinder head See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair.
20. Install the intake manifold See: Intake Manifold/Service and Repair/Intake Manifold Removal/Installation.
