ZDX V6-3.7L (2010)
Oil Filter Adapter: Service and Repair
Engine Oil Filter Feed Pipe Replacement
1. Remove the oil filter See: Oil Filter/Service and Repair.
2. Remove the oil filter feed pipe.
3. Install two 20 x 1.5 mm nuts (A) onto the new oil filter feed pipe, and hold one nut with a wrench, then tighten the other nut.
4. Apply new engine oil to the oil filter feed pipe threads, then torque the oil filter feed pipe to 35 Nm (3.6 kg-m, 26 lb-ft),then remove the nuts from
the oil filter feed pipe.
5. Install the oil filter See: Oil Filter/Service and Repair.