ZDX V6-3.7L (2010)
Oil Spray Jet: Service and Repair
Engine Oil Jet Replacement
1. Remove the crankshaft from the engine block See: Cylinder Block Assembly/Crankshaft/Service and Repair/Crankshaft and Piston Removal.
2. Remove the oil jet bolt (A), then remove the oil jet (B).
3. Carefully install the new oil jet and tighten the oil jet bolt.
4. Install the crankshaft See: Cylinder Block Assembly/Crankshaft/Service and Repair/Crankshaft and Piston Installation.
