ZDX V6-3.7L (2010)
purge hose (E).
5. Connect the IMT actuator connector (A), the vacuum hose (B), the brake booster vacuum hose (C), and the PCV hose (D).
6. Install the intake air duct (A).
NOTE: When tightening the screw of the hose band (B), align the edge of the hose band (C) with the mark (D) painted on the hose band. If you tighten
the screw over the mark, replace the hose band.
7. Connect the breather pipe (E).
8. Install the engine cover.
