ZDX V6-3.7L (2010)
Crankshaft Gear/Sprocket: Service and Repair
Timing Belt Drive Pulley Replacement
1. Remove the timing belt See: Timing Belt/Service and Repair/Timing Belt Removal.
2. Remove the timing belt stopper (A), then remove the timing belt drive pulley (B) and the key (C).
3. Inspect the timing belt drive pulley and the key for damage. If it is cracked or damaged, replace the timing belt drive pulley and the key.
4. Install the new timing belt drive pulley and the key, then install the timing belt stopper.
5. Install the timing belt See: Timing Belt/Service and Repair/Timing Belt Installation.
6. Do the crankshaft position (CKP) pattern clear/CKP pattern learn procedure See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview.
