ZDX V6-3.7L (2010)
Water Pump: Testing and Inspection
Water Pump Inspection
1. Remove the timing belt See: Timing Components/Timing Belt/Service and Repair/Timing Belt Removal.
2. Turn the water pump pulley counterclockwise, and check sure that it turns freely. If it does not turn freely, replace the water pump See: Service
and Repair/Water Pump Replacement.
NOTE: When you check the water pump, you may see a small amount of "weeping" from the bleed holes (A). This is normal.
3. Install the timing belt See: Timing Components/Timing Belt/Service and Repair/Timing Belt Installation.